کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7126010 | 1461540 | 2014 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Geometric optimization of trough collectors using terrestrial laser scanning: Feasibility analysis using a new statistical assessment method
ترجمه فارسی عنوان
بهینه سازی هندسی جمع کننده های با استفاده از اسکن لیزر زمینی: تجزیه و تحلیل امکان سنجی با استفاده از روش ارزیابی آماری جدید
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
تجزیه و تحلیل شکل، اسکن لیزر زمینی، گرداورنده خورشیدی، حوزه های عدم اطمینان، بوت استرپینگ،
ترجمه چکیده
ما یک روش جدید برای ارزیابی اینکه آیا شکل یک شیء اندازه گیری شده با سطح شناخته شده مطابقت دارد پیشنهاد می کنیم. این روش براساس محاسبه حوزه های عدم اطمینان برای یک سطح اطمینان خاص است که توسط مدل سازی هسته از طریق نمونه برداری با وزنی از ابر نقطه انجام می شود. اگر این حوزه های عدم اطمینان حاوی سطح نظری باشند، دو سطح به صورت آماری متفاوت می باشند. این روش برای ارزیابی اسکن زمین لرزه به عنوان یک تکنولوژی مناسب برای بهینه سازی سریع و دقیق هندسی از جمع کننده های پارابولیکی در هنگام بهره برداری استفاده شده است. یک گرداب پارابولیک با استفاده از اسکنرهای لیزر زمینی زمینی و زمان پرواز و فیزیکی اندازه گیری شد و نتایج با آن ها مقایسه شد. تاثیر چگالی نقطه و انتخاب سطح (جلو یا عقب) بر کیفیت بهینه سازی هندسی، با نتایجی که نشان می دهد اسکن لیزری زمینی براساس داده های جمع آوری شده از سطح جلویی جمع کننده مناسب برای بهینه سازی هندسی فرعی پارابولی نیست گردانندگان با این حال، دقت به دست آمده برای اسکن با وضوح بالا سطح عقب جمع کننده شبیه به آن است که توسط فوتوگرامتری، با مزیت که زمان گرفتن اطلاعات قابل توجهی سریع تر است.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
کنترل و سیستم های مهندسی
چکیده انگلیسی
We propose a new methodology to assess whether the shape of a measured object fits a known surface. The method is based on calculating uncertainty spheres for a specific confidence level obtained by kernel modelling through a weighted resampling of the point cloud. If these uncertainty spheres do not contain the theoretical surface the two surfaces are considered to be statistically different. The methodology was used to assess terrestrial laser scanning as a suitable technology for fast and precise geometric optimization of parabolic trough collectors when in operation. A parabolic trough collector was measured using time-of-flight and phase-shift terrestrial laser scanners and results were compared with those obtained using photogrammetry. The impact of point density and the choice of surface (front or rear) on geometric optimization quality were analysed, with the results indicating that terrestrial laser scanning based on data collected from the front surface of the collector is not suitable for geometric optimization of parabolic trough collectors. However, the precision achieved for high-resolution scanning of the rear surface of the collector is similar to that yielded by photogrammetry, with the advantage that data acquisition time is considerably faster.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Measurement - Volume 47, January 2014, Pages 92-99
Journal: Measurement - Volume 47, January 2014, Pages 92-99
نویسندگان
Francisco de AsÃs López, Silverio GarcÃa-Cortés, Javier Roca-Pardiñas, Celestino Ordóñez,