کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7131620 | 1461687 | 2018 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Structured light system calibration with unidirectional fringe patterns
ترجمه فارسی عنوان
کالیبراسیون سیستم سازه ای با الگوهای حاشیه ی یک طرفه
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
نور ساختار کالیبراسیون، مدل پینچول، تغییر فاز، حداقل مربع،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی برق و الکترونیک
چکیده انگلیسی
For the calibration of a structured light system, one type of highly accurate calibration method was developed by treating the projector as an inverse camera. This type of method typically creates pixel-to-pixel mapping between a camera point and a projector point using fringe patterns and resultant phase maps in orthogonal directions. However, requiring orthogonal patterns limits its feasibility of implementation on systems where the illumination device (e.g. grating projectors, interferometers, etc.) only supports fringe projection in one direction. This paper introduces a novel calibration method that only uses patterns in a single direction. We have theoretically proved that there exists one degree-of-freedom of redundancy in conventional calibration methods, making it possible to reduce the requirement of using orthogonal fringe patterns. Experiments show that under a measurement range of 200â¯mm(X)â¯Ã⯠150â¯mm (Y)â¯Ãâ¯120â¯mm (Z), our measurement results are comparable to the results obtained using conventional calibration method. Evaluated by repeatedly measuring a sphere with 147.726â¯mm diameter, our measurement accuracy on average can be as high as 0.20â¯mm with a standard deviation of 0.12â¯mm.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optics and Lasers in Engineering - Volume 106, July 2018, Pages 86-93
Journal: Optics and Lasers in Engineering - Volume 106, July 2018, Pages 86-93
نویسندگان
Vignesh Suresh, Jace Holton, Beiwen Li,