کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7138428 1461922 2012 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Gold nano-particle-based thermal sensors fabricated using microspotting and DEP techniques
موضوعات مرتبط
مهندسی و علوم پایه شیمی الکتروشیمی
پیش نمایش صفحه اول مقاله
Gold nano-particle-based thermal sensors fabricated using microspotting and DEP techniques
چکیده انگلیسی
We show that pearl chains of gold nano-particles (Au NPs) are formed consistently between microelectrodes by combining microspotting and dielectrophoretic (DEP) techniques. Experimental results on various sized Au particles and DEP parameters, including voltage and frequency, are reported in this paper to explore the critical parameters in controlling the pearl chain formation (PCF) process between microelectrodes. PCF is observed from 10 kHz to 5 MHz for 100 nm diameter Au NPs, and 100 kHz to 10 MHz for 10 nm Au NPs. Variations in formation rate are detected when the applied voltage and particle size varies. At higher voltages, PCF occurs at a higher rate and the formation time decreases. The optimum frequency for Au NPs PCF shifts to a higher frequency region when the particle size decreases. Theoretical analysis is carried out by calculating the DEP force with AC electrokinetics to explain the observations at DEP frequencies ranging from 10 Hz to 10 MHz. Finally, Au NP chains formed between the microelectrodes are shown to vary in resistance consistent with predictions for a simplified model of an impinging jet system, indicating that these Au particle sensors could potentially be used to precisely measure localized temperatures and other localized thermal phenomena.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Sensors and Actuators A: Physical - Volume 178, May 2012, Pages 32-39
نویسندگان
, , , ,