Friction surfacing of AISI 316 over mild steel: A characteriation study

An attempt has been made with overlaying of stain-less steel on mild steel by the technique of friction surfacing. This investigation elaborates the excellence acquired by different combination of the process parameters used in friction surfacing specifically traverse speed of the cross slide, speed of rotation of the spindle and the uniaxial compressive load. Excellent overlaying has been obtained amongst the chosen materials. To which, the coating can be done with various set of process parameters. It has been observed that the bond strength of the coating was found to be at a maximum of 502 MPa by ram tensile test. Based upon this results the surface methodology was characterized with scanning electron microscope. For authenticating the results, the coated specimen was subjected to salt spray test. The bonding microstructure was characterized using optical microscopy and X-ray diffraction. Corrosion resistance of surfaced coatings was found to be more inferior to that of mechtrode material and greater with the substrate.