کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7157711 1462788 2018 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Minimizing thermal interference effects of multiple heat sources for effective cooling of power conversion electronics
ترجمه فارسی عنوان
به حداقل رساندن اثرات تداخل حرارتی چندین منبع حرارت برای خنک سازی موثر الکترونیک تبدیل قدرت
کلمات کلیدی
خنک کننده الکترونیکی سینک حرارتی، کنسانتره اجباری، منبع حرارت چندگانه، تداخل حرارتی،
ترجمه چکیده
عملکرد حرارتی یک مبدل حرارتی باله به عنوان تابعی از محل منابع چندگانه گرما برای به حداقل رساندن اثر تداخل حرارتی مورد بررسی قرار گرفت. تجزیه و تحلیل عددی تحت شرایط خنک کن برای طراحی یک سیستم خنک کننده برای یک منبع حرارت بالا قدرت انجام شد. رفتار حرارتی گرما و هوای اطراف شبیه سازی شده است. همچنین عملکرد حرارتی ضخامت پایه های مختلف تحت شرایط شار حرارت محلی را برای تعیین ضخامت پایه مبدل حرارتی بهینه با استفاده از عرض منبع گرما و ضریب هدایت گرمای خنک مورد بررسی قرار دادیم. محل مطلوب با بررسی اثرات تعداد رینولدز، هدایت حرارتی گرمای خنک، نسبت انتقال گرما برای چندین منبع حرارت و عرض منبع گرما تعیین شد. دستورالعمل نصب بر روی گرمایش برقی صفحه تهیه شده بود تا به کاربران کمک کند از اثر تداخل حرارتی بر اساس عرض منبع گرمای آنها جلوگیری شود. با استفاده از معادله همبستگی برای به دست آوردن محل مطلوب که در آن حداکثر دما از منبع گرما به حداقل می رسد، مقاومت حرارتی تا 30٪ کاهش یافت.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی (عمومی)
چکیده انگلیسی
The thermal performance of a plate fin heat sink was investigated as a function of the location of multiple heat sources to minimize the thermal interference effect. Numerical analysis was performed under forced-convection conditions to design a cooling system for a high-power heat source. The thermal behaviors of the heat sink and surrounding air were simulated. We also investigated the thermal performances of various base thicknesses under local heat flux conditions to determine the optimal heat sink base thickness using the width of the heat source and conduction coefficient of the heat sink. The optimal location was determined by investigating the effects of the Reynolds number, thermal conductivity of the heat sink, heat transfer rate ratio for multiple heat sources, and width of the heat source. An installation guideline of the plate fin heat sink was prepared to help users avoid the thermal interference effect depending on the width of their heat source. By applying a correlation equation to obtain the optimal location where the maximal temperature of the heat source is minimized, the thermal resistance was decreased by up to 30%.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy Conversion and Management - Volume 174, 15 October 2018, Pages 218-226
نویسندگان
, , , ,