کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7164652 1462877 2014 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Numerical investigation on a thermoacoustic heat engine unit with a displacer
ترجمه فارسی عنوان
بررسی عددی بر روی یک موتور حرارتی با موتور جابجایی
کلمات کلیدی
دو اقدام، موتور حرارتی حرارتی، جابجایی
ترجمه چکیده
یک موتور گرمای جدید حرارتی - موتور حرارتی حرارتی آوازی دو طرفه که اخیرا توسط گروه تحقیقاتی ما ارائه شده است. این شامل حداقل سه واحد متقارن موتور و رزوناتور است و دارای مزایای کارایی، چگالی قدرت و انعطاف پذیری گرما است. با این حال، برخی از نتایج محاسباتی و تجربی نشان می دهد که تلفات گرمای قابل توجهی ناشی از جت جریان در لوله بافر حرارتی به علت ساختار مبدل حرارتی با درجه حرارت بالا و مبدل حرارتی محیط ثانویه در دو انتها است. برای حل این مشکل، یک جابجایی در لوله بافر حرارتی پیشنهاد شده است تا جت جریان را سرکوب کند. علاوه بر این، جابجایی قادر به جداسازی منطقه گرم از درجه حرارت اتاق است، که فرصتی برای از بین بردن مبدل حرارتی ثانویه می باشد. برای بررسی چنین موتور حرارتی حرارتی دوتایی، یک موتور تست موتور واحد با استفاده از دو موتور خطی برای ایجاد شرایط عملیاتی واقعی در سیستم توسعه یافته است. در این مقاله، یک شبیه سازی عددی برای نشان دادن تأثیرات جابجایی بر عملکرد سیستم انجام شده است. با توجه به نتایج عددی، هنگامی که آوارگان در حالت رزونانس کار می کنند، تاثیر آوارگان بسیار محدود است. علاوه بر این، تأثیرات ضریب ثابت و مکانیکی مکانیکی آجدار به طور دقیق مورد تجزیه و تحلیل قرار گرفته است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی (عمومی)
چکیده انگلیسی
A novel thermoacoustic heat engine - double-acting travelling wave thermoacoustic heat engine has been proposed by our research group recently. It consists of at least three symmetric engine and resonator units and has advantages on efficiency, power density and heat source flexibility. However, some computational and experimental results indicate a dramatic heat loss caused by the jet-flow in the thermal buffer tube due to the structures of the high temperature heat exchanger and the secondary ambient heat exchanger at its two ends. To solve this problem, a displacer locating in the thermal buffer tube is proposed to suppress the jet-flow. Moreover, the displacer is capable of isolating the hot region from room temperature, which provides an opportunity to eliminate the secondary ambient heat exchanger. In order to investigate such a double-acting thermoacoustic heat engine, a test rig of the engine unit has been developed by utilizing two linear motors to provide real operational conditions in the system. In this paper, a numerical simulation is performed to reveal the influences of the displacer on the system performance. According to the numerical results, the impact of displacer is very limited when the displacer is working under the resonant state. In addition, the influences of spring constant and mechanical damping coefficient of the displacer are analyzed in detail respectively.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy Conversion and Management - Volume 85, September 2014, Pages 793-799
نویسندگان
, , , , ,