کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7168920 | 1463036 | 2018 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fatigue strength improvement of an aluminum alloy with a crack-like surface defect using shot peening and cavitation peening
ترجمه فارسی عنوان
بهبود قدرت خستگی یک آلیاژ آلومینیوم با نقص سطح کراک مانند با استفاده از ضرب و شتم شکن و حفره
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
حفره حفره، ساچمه زنی، استحکام خستگی، نقص سطحی، آلیاژ آلومینیوم،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
چکیده انگلیسی
The effects of shot peening (SP) and cavitation peening (CP) on the bending fatigue strength of the 7075 aluminum alloy with a crack-like surface defect were investigated. Test specimens containing a small semicircular slit were subjected to SP and CP. Bending fatigue tests were conducted on the specimens to determine the fatigue strength and critical depth (ac) of the semicircular slit that can be rendered harmless by peening. The results indicated that fatigue strengths increased by peening and that semicircular slits less than 0.1 and 0.2â¯mm in depth were rendered harmless by SP and CP, respectively. The ac values estimated based on fracture mechanics were similar to experimental values, indicating that ac was affected by the distribution of the compressive residual stress induced by peening.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Fracture Mechanics - Volume 193, 15 April 2018, Pages 151-161
Journal: Engineering Fracture Mechanics - Volume 193, 15 April 2018, Pages 151-161
نویسندگان
Koji Takahashi, Hiroko Osedo, Takaya Suzuki, Shinsaku Fukuda,