کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7169532 | 1463071 | 2016 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Size effect tests of different notch depth specimens with support rotation measurements
ترجمه فارسی عنوان
تست اندازه نمونه های عمق حفره های مختلف با اندازه گیری چرخش پشتیبانی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
مقیاس قدرت، قانون اثر بزرگ، شکستگی بتنی، اثر عمیق نکته، استحکام خمشی، تست شکستگی، چرخش پشتیبانی،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
چکیده انگلیسی
Test results from a Type I & II size effect experimental study on notched and un-notched beams are presented in this paper. The test specimens were geometrically similar but had different scale ratios and different notch length ratios of 0, 0.02, 0.075, 0.15 and 0.3. The specimens had rectangular cross sections with constant thickness of 40Â mm and the depth varied from 40Â mm to 500Â mm corresponding to a scale ratio of 1:12.5. Rotations measured at support locations for each specimen are presented to reinforce the experimental findings. It was observed that all specimens with different notch-to-length ratios exhibited size effect, in which the stress at maximum load (failure load divided by cross-sectional area) decreased as the size was increased. The results indicate that the failure is governed by fracture mechanics principles. This phenomenon is not addressed in current design codes, which do not account for such size effect. The test results showed that beams with shallow notch exhibit Type I, beams with deep notch exhibit Type II size effect law. The test results compared favorably with several widely accepted size effect models.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Engineering Fracture Mechanics - Volume 157, May 2016, Pages 43-55
Journal: Engineering Fracture Mechanics - Volume 157, May 2016, Pages 43-55
نویسندگان
Yasin ÃaÄlar, Sıddık Åener,