کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7175093 1466045 2017 22 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Opening reinforcement design and buckling of spherical shell subjected to external pressure
ترجمه فارسی عنوان
طراحی آرماتور باز و خم شدن پوسته کروی تحت فشار خارجی
کلمات کلیدی
ترجمه چکیده
این مقاله بر روی پوسته های کروی با حفره ها و تقویت تحت فشار خارجی یکنواخت تمرکز دارد. برای کاهش اثرات ضعیف و انسداد محلی حفره های روی این پوسته های کروی، پارامترهای تقویت باز برای به حداقل رساندن بی ثباتی لرزشی بهینه شده اند. با توجه به نتایج بهینه سازی، دو مدل آزمایشگاهی مقیاس تولید و آزمایش شد. هندسه، ضخامت پوسته کروی، ضخامت دیواره، بار انقباض و حالت فروپاشی نهایی برای هر پوسته کروی با باز کردن اندازه گیری شد. خواص مواد ورق های مربوطه نیز اندازه گیری شد. رفتار خمشی یک پوسته کروی شبیه شده با باز کردن بر اساس داده های تجربی، به صورت عددی نشان داده شده است. محاسبات عددی شامل در نظر گرفتن شکل واقعی هندسی، مقادیر میانگین پارامترها و مدلسازی کشش پلاستیکی منحنی های تنش-تنش واقعی است. علاوه بر این، اثرات ناپایداری های هندسی اولیه بر بار بحرانی پوسته کروی شبیه شده به صورت عددی مورد تجزیه و تحلیل قرار گرفت. مدل اسکن با توجه به نواقص قطعی حاصل از اشکال هندسی اندازه گیری محاسبه شد. مدل نظری با توجه به ناپایداری هندسی معادل، به عنوان اولین حالت خمشی از خم شدن خطی محاسبه شد. نتایج تحقیقات تجربی و عددی در جداول و ارقام مقایسه شده است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
This paper focuses on spherical shells with openings and reinforcement under uniform external pressure. To reduce the local weakening and buckling effects of the openings on these spherical pressure shells, the opening reinforcement parameters were optimized to minimize the buckling instability. According to the result of the optimization, two laboratory-scale models were manufactured and tested. The geometry, spherical shell thickness, wall thickness, buckling load, and final collapsed mode were measured for each spherical shell with an opening; the material properties of the corresponding sheets were also measured. The buckling behavior of a simulated spherical shell with an opening was demonstrated numerically according to experimental data. Numerical calculations involved considering the real geometrical shape, average values of parameters, and elastic-plastic modeling of true stress-strain curves. Moreover, the effects of initial geometrical imperfections on the critical load of the simulated spherical shell were analyzed numerically. The scanning model was calculated according to deterministic imperfections obtained from measured geometrical shapes. The theoretical model was calculated according to the equivalent geometrical imperfection valued as the first buckling mode of linear buckling. The results of the experimental and numerical investigations were compared in tables and figures.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Pressure Vessels and Piping - Volume 158, December 2017, Pages 29-36
نویسندگان
, , , , ,