کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7176301 | 1466708 | 2018 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effects of ultrasonic vibration in the CMT process on welded joints of Al alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
An ultrasonic peening device was used to supply ultrasonic vibration during cold metal transfer welding of Al alloys. Application of ultrasonic vibration was found to increase the weld depth and weld reinforcement and to decrease the contact angle. The Al-Si eutectic lamellar spacing increased and the pore number decreased. There were many fine equiaxed grains near rich Al-Si eutectic structures. A grain size range of 50-500â¯nm was obtained through grain refining brought about by cavitation and acoustic streaming. This grain refining led to the increment of hardness and wear resistance.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 259, September 2018, Pages 282-291
Journal: Journal of Materials Processing Technology - Volume 259, September 2018, Pages 282-291
نویسندگان
Yinbao Tian, Junqi Shen, Shengsun Hu, Zhijiang Wang, Jian Gou,