کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7176407 | 1466711 | 2018 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Modelling of residual stresses in a narrow-gap welding of ultra-thick curved steel mockup
ترجمه فارسی عنوان
مدل سازی تنش های باقی مانده در یک جوشکاری باریک ضخیم از فولاد منحنی فوق العاده ضخیم
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
استرس باقی مانده، جوش باریک، مدل های بسیار ضخیم روش عنصر محدود مدل گذرنامه
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
A plane strain model, an axisymmetric model and a lumped-pass three-dimensional (3D) model were employed to simulate the residual stresses in a narrow-gap welding 300â¯mm-thick curved steel mockup. The lumped-pass 3D model was built with the lumping scheme based on the two-dimensional (2D) temperature field result. The residual stresses on the top surface of the mockup were measured using the hole-drilling method and compared with the simulated stresses. Results show that the plane strain model cannot capture the asymmetric conditions of the curved mockup; the through-thickness transverse stress within the weld zone presents a self-equilibrated distribution, and the through-thickness hoop stress within the weld zone are almost tensile with the peak value occurring at a certain depth (8â¯mm) beneath the top and bottom surfaces.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 256, June 2018, Pages 239-246
Journal: Journal of Materials Processing Technology - Volume 256, June 2018, Pages 239-246
نویسندگان
Chuan Liu, Jiawei Yang, Yifeng Shi, Qiang Fu, Yong Zhao,