کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7176521 1466713 2018 11 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Experimental and numerical study of section restriction effects on filling behavior in low-pressure aluminum casting
ترجمه فارسی عنوان
بررسی تجربی و عددی اثرات محدودیت بخش بر رفتار پر شدن در ریخته گری آلومینیومی کم فشار
ترجمه چکیده
جریان فلز مذاب تحت فشار کم فشار در آزمایشگاه و به صورت عددی در داخل قالب های ماسه ای با مقطع عرضی مختلف و رمپ فشار مختلف مورد بررسی قرار گرفت. شبیه سازی دینامیکی پیشنهاد شده به صورت کمی مقادیر نوسانات مشاهده شده را پیش بینی می کند. یک مدل تحلیلی برای اتصال ارتفاع بیش از حد به محدودیت هندسی و رمپ فشار ایجاد شده است. ارتفاع بیشینه محاسبه شده است متناسب با رمپ و غیر خطی تحت تاثیر تغییر بخش است که توسط نتایج آزمایش تایید شده است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
چکیده انگلیسی
The molten metal flow under low-pressure filling was investigated both experimentally and numerically inside sand molds with different cross sections and different pressure ramps. The proposed fluid dynamics simulation predicts quantitatively the observed filling oscillations. An analytical model is developed to link the over-height with the geometrical restriction and the pressure ramp. The calculated over-height is proportional to the ramp and non-linearly impacted by the section change as confirmed by the experimental results.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 254, April 2018, Pages 124-134
نویسندگان
, , ,