کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7176965 | 1466742 | 2015 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Analysis and reduction of coil temperature rise in electromagnetic forming
ترجمه فارسی عنوان
تجزیه و تحلیل و کاهش افزایش سرعت سیم پیچ در تشکیل الکترومغناطیسی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
How to reduce the temperature rise of coil winding is an important issue for improving the production and lifetime performance of the tool coil in electromagnetic forming system. To address the problem, this paper proposes a new discharge circuit configuration with a crowbar circuit to control the discharge current flowing in the tool coil and then to reduce the Joule heating generated without affecting the forming efficiency. A detailed numerical analysis of the mechanism of the temperature rise reduction was first carried out, and then numerical simulation and experimental investigation of the effects of the crowbar circuit on the coil current and surface temperature rise were investigated. The simulation results show that the Joule heating in the coil winding can be reduced from 4.62 kJ to 2.07 kJ when a crowbar circuit with a resistor of 0.3 Ω was applied, and the corresponding temperature rise in the coil can also be effectively reduced. Meanwhile, the experimental results show good agreements with the simulation results, further verifying the effectiveness of the proposed method.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 225, November 2015, Pages 185-194
Journal: Journal of Materials Processing Technology - Volume 225, November 2015, Pages 185-194
نویسندگان
Quanliang Cao, Xiaotao Han, Zhipeng Lai, Qi Xiong, Xiao Zhang, Qi Chen, Houxiu Xiao, Liang Li,