کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7176971 | 1466742 | 2015 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Gleeble simulation of the HAZ in Inconel 617 welding
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Gleeble simulation of the HAZ in Inconel 617 welding Gleeble simulation of the HAZ in Inconel 617 welding](/preview/png/7176971.png)
چکیده انگلیسی
Five kinds of thermal cycle, with different peak temperatures ranging between 1150 °C and 1350 °C were taken to simulate HAZs with same heating and cooling rate. The microstructure of different simulated HAZs was characterized by optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscope (TEM). The micro-hardness, grain size and tensile test at 750 °C of simulated HAZs were conducted. Coarsened carbides along the grain boundaries are observed in the HAZs simulated at 1200 °C and 1250 °C. For the HAZs simulated at 1300 °C and 1350 °C, the carbides inside grains vanish, and continuous lamellar structure occurs at the grain boundaries. The microstructure of HAZ simulated at 1150 °C is similar to that of base metal (BM). The micro-hardness and average grain size of simulated HAZs have no obvious variation compared to the BM. Tensile test results show that the yield stress (YS) and ultimate tensile stress (UTS) decrease as simulation peak temperature increases, which attributes to the coarsened carbides and continuous lamellar structure occurring at the grain boundaries at higher temperature.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 225, November 2015, Pages 221-228
Journal: Journal of Materials Processing Technology - Volume 225, November 2015, Pages 221-228
نویسندگان
Wen Liu, Fenggui Lu, Renjie Yang, Xinhua Tang, Haichao Cui,