کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7180572 | 1467837 | 2018 | 35 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Positioning behavior resulting from the application of ultrasonic oscillation to a linear motion ball bearing during step motion
ترجمه فارسی عنوان
رفتار موقعیتی ناشی از استفاده از نوسان اولتراسونیک به یک حرکت بلبرینگ خطی در طی حرکت گام
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
نوسانات التراسونیک، بلبرینگ حرکتی خطی، تثبیت موقعیت، کاهش اصطکاک،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
چکیده انگلیسی
In general, positioning accuracy of precision machineries equipped with a moving table is strongly influenced by friction encountered by linear motion rolling bearings. However, ultrasonic oscillation is often applied to bearing surfaces to reduce the friction. This report describes the behaviors in the process of step positioning of a one-axis linear motion stage guided by a linear motion ball bearing. In experiment, the transient step positioning response of a voice-coil-motor-driven stage is observed using a linear encoder. Moreover, a guide rail and a carriage of the guideway are oscillated by two ultrasonic actuators. As a result, continuous oscillation throughout the process of positioning causes the settling time for the stopping position to deteriorate because there is less friction of contact surfaces in bearing. On the other hand, a 10Â ms oscillation after the start of the movement and a 75Â ms oscillation around the settlement simultaneously improve the average displacement of positioning from 1.0097Â mm to 1.0030Â mm and shorten the delay time of movement from 14.975Â ms to 14.65Â ms.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Precision Engineering - Volume 51, January 2018, Pages 362-372
Journal: Precision Engineering - Volume 51, January 2018, Pages 362-372
نویسندگان
Toshiharu Tanaka, Takaaki Oiwa, Hashim Syamsul,