Roughness variations in cylinder liners induced by honing tools' wear

The manufacturing and finishing (honing) of cylinder liners for the automotive industry is a constant challenge in order to reduce friction losses and oil consumption. A better knowledge of surfaces generated during plateau honing is then required for optimization of the process. Despite a well-known and controlled honing process, variations in surface roughness appear due to honing tool wear and need to be mapped and analyzed. The following paper proposes to map the variations in roughness by using confocal 3D measuring equipment able to inspect any area of a cylinder liner. Six motor blocks, each with five cylinder liners, were evaluated with 20 topography measurements per liner (giving six hundred 3D measurements in total). In addition to standard 3D roughness parameters, tailor made parameters extracting honing texture information are computed. The results show that only a few parameters (Spk, Ssc and Sk) do correlate with the honing tool wear specific to each cylinder. Tailor made parameters indicate similar results. Indeed, as the honing tool wears down, the cylinder liner surface gets rougher plateau or peaks and sharper asperities indicating that ploughing occurs instead of cutting. In future, experimental models could be built in order to perform production and functional optimizations.