کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7195374 1468218 2016 18 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Optimal inspection-based preventive maintenance policy for three-state mechanical components under competing failure modes
ترجمه فارسی عنوان
خط مشی پیشگیرانه مبتنی بر بازرسی بهینه برای مولفه های مکانیکی سه حالت تحت حالت های شکست رقیب
ترجمه چکیده
تخریب اجزای مکانیکی غیر ثابت است و سطح تخریب آنها تنها از طریق بازرسی غیر مستقیم در اکثر موارد قابل تشخیص است. با توجه به تأثیر ویژگی غیر ثابت و تاخیر تشخیص حالت ناشی از بازرسی گسسته در هزینه عملیات درازمدت، این مقاله بر پیشنهاد یک سیاست حفظ و نگهداری بهینه بر اساس بازرسی برای اجزای مکانیکی سه حالت که تحت شرایط رقیب رقابتی قرار دارند، تمرکز دارد. . یک مدل تخریب فرآیند دو وینر برای توصیف دو حالت عمل، که شامل دو مدل فرایند وینر تحت قانون مشابه با پارامترهای مختلف است، ایجاد شده است. علاوه بر این، یک سیاست نگهداری پیشگیرانه از جمله آستانه تخریب، آستانه سن و محدودیت کنترل تخریب پذیرفته می شود. یک مدل مبتنی بر احتمال پنج سناریو برای توصیف تکامل دولت در یک دوره بازرسی پیشنهاد شده است و سپس مدل تحلیلی تأثیر تاخیر در شناسایی حالت انتقال و سطح تخریب در سیاست پیشگیرانه ارائه شده است. یک مدل بهینه سازی تعمیر و نگهداری مبتنی بر بازرسی ایجاد شده است. در نهایت، تجزیه و تحلیل حساسیت از لحاظ متغیرهای تصمیم گیری برای توزیع زمان زمان انتقال و پارامترهای در حالت خاموش بودن بر اساس نمونه های عددی انجام می شود و کارایی و برتر بودن سیاست پیشنهاد شده با مقایسه با نگهداری فعلی دو حالت سیاست.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی
The degradation of mechanical components is non-stationary and their degradation level can only be detected through offline discrete inspection in most cases. Aiming at the effect of the non-stationary feature and the delay of state detection caused by discrete inspection on long-run operation cost, this paper focuses on proposing an optimal inspection-based maintenance policy for three-state mechanical components subject to competing failure modes. A double-Wiener-process degradation model is established to describe the two operation states, which includes two Wiener process models under the same law but with different parameters. In addition, a preventive maintenance policy including a degradation threshold, an age threshold and a degradation control limit are adopted. A five-scenario probability-based model is proposed to describe the state evolution during one inspection interval and then the analytical model of the impact of delay on detecting state-transition and degradation-level on preventive maintenance policy is proposed. An optimization model of an inspection- based maintenance is established. Finally, sensitivity analysis in terms of the decision variables for state-transition time distribution and parameters in wear-out state is carried out based on numerical examples and the efficiency and superiority of the proposed policy is demonstrated by comparing with the current two-state maintenance policy.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Reliability Engineering & System Safety - Volume 152, August 2016, Pages 95-103
نویسندگان
, , , , , ,