کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7205706 | 1468627 | 2018 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The effects of electrically-assisted ultrasonic nanocrystal surface modification on 3D-printed Ti-6Al-4V alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
3D-printed Ti-6Al-4V components have great potential in the aerospace and biomedical industries. However, their wide application is limited by some inherent disadvantages, such as poor surface finish and high porosity. In this study, an innovative method, electrically-assisted ultrasonic nanocrystal surface modification (EA-UNSM) was introduced to process 3D-printed Ti-6Al-4V samples. The effect of EA-UNSM on surface finish, microstructure, porosity and in-depth hardness was investigated. Compared with the conventional UNSM process, smoother surfaces and lower subsurface porosities were obtained after EA-UNSM. EA-UNSM also led to a thicker plastically-affected depth compared with conventional UNSM. Numerical modelling showed that localized heating occurs near the pores in 3D-printed Ti-6Al-4V subjected to electric current. This localized heating could potentially facilitate pore closure under ultrasonic striking.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Additive Manufacturing - Volume 22, August 2018, Pages 60-68
Journal: Additive Manufacturing - Volume 22, August 2018, Pages 60-68
نویسندگان
Hao Zhang, Jingyi Zhao, Jun Liu, Haifeng Qin, Zhencheng Ren, G.L. Doll, Yalin Dong, Chang Ye,