کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7205890 | 1468628 | 2018 | 15 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Glass forming ability, flexural strength, and wear properties of additively manufactured Zr-based bulk metallic glasses produced through laser powder bed fusion
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
An evaluation of low-cost, high-oxygen content Zr-Cu-Al-Nb bulk metallic glasses (BMGs) produced through laser powder bed fusion (PBF) was performed. Four-point bending and wear resistance tests were used to compare the mechanical properties of the printed alloy with laboratory grade cast parts. It is shown that the laser PBF parts, while not being able to be cast as a bulk glass, can be printed amorphous up to at least several millimeters thick and yet still have reasonable mechanical properties.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Additive Manufacturing - Volume 21, May 2018, Pages 312-317
Journal: Additive Manufacturing - Volume 21, May 2018, Pages 312-317
نویسندگان
Punnathat Bordeenithikasem, Moritz Stolpe, Alexander Elsen, Douglas C. Hofmann,