کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7206060 1468644 2014 21 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effective mechanical properties of lattice material fabricated by material extrusion additive manufacturing
ترجمه فارسی عنوان
خواص مکانیکی مواد شبیه سازی شده توسط مواد افزودنی اکستروژن مواد ساخته شده است
ترجمه چکیده
در این مقاله یک روش همگن سازی دو مرحلهای برای ارزیابی خواص مکانیکی مکانیزم ساختار ساخت یافته یک شبکه ساخته شده توسط فرآیند تولید افزودنی اکستروژن مواد ارائه شده است. برای در نظر گرفتن خصوصیات فرایند تولید افزودنی در روش های برآورد، سطوح مقیاس همگن شدن به سه مرحله تقسیم می شوند: سطح رسوب لایه، ساختار و ساختار شبکه. این روش شامل دو تحول در میان مراحل می شود. در مرحله اول، تبدیل بین رسوب لایه و سطح عناصر ساختاری برای یافتن خواص مؤثر هندسی و مؤثر عناصر ساختاری در ساختار شبکه پیشنهاد شده است. در مرحله دوم، روش تخمین خواص مکانیکی مکانیکی مواد شبیه سازی ارائه شده است که از یک سلول واحد استفاده می کند و بر اساس روش همگرایی مخفیانه برای ساختار دوره ای است. این روش برای ساختار شبکه مکعبی اجرا شده و در مقایسه با نتایج تجربی برای اهداف اعتبار سنجی.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
چکیده انگلیسی
In this paper, a two-step homogenization method is proposed and implemented for evaluating effective mechanical properties of lattice structured material fabricated by the material extrusion additive manufacturing process. In order to consider the characteristics of the additive manufacturing process in estimation procedures, the levels of scale for homogenization are divided into three stages - the levels of layer deposition, structural element, and lattice structure. The method consists of two transformations among stages. In the first step, the transformation between layer deposition and structural element levels is proposed to find the geometrical and material effective properties of structural elements in the lattice structure. In the second step, the method to estimate effective mechanical properties of lattice material is presented, which uses a unit cell and is based on the discretized homogenization method for periodic structure. The method is implemented for cubic lattice structure and compared to experimental results for validation purposes.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Additive Manufacturing - Volumes 1–4, October 2014, Pages 12-23
نویسندگان
, , , ,