کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7207696 | 1469081 | 2016 | 36 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of molecular weight on the physical properties of poly(ethylene brassylate) homopolymers
ترجمه فارسی عنوان
اثر وزن مولکولی بر خواص فیزیکی هموپلیمرهای پلی (اتیلن براسیلات)
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی پزشکی
چکیده انگلیسی
Poly(ethylene brassylate) (PEB) is a biodegradable polyester that nowadays is of particular interest owing to its poly(ε-caprolactone)-like properties (with a Tg at â30 °C and a Tm at 70 °C) and the low-cost of its monomer. However, it is not simple to achieve high molar masses with conventional catalysts. In this work, high molar mass PEBs, characterized by SEC-MALS, were successfully synthesized using triphenyl bismuth (Ph3Bi) as catalyst. Then, with the aim of evaluating the impact of the molecular weight on the physical properties, several PEBs ranging from 27 to 247 kg molâ1 were prepared. It was demonstrated that above a Mw of 90 Kg molâ1, PEB behaved in a constant manner. PEBs with lower molecular weight (<46 Kg molâ1) showed lower values of Tg (~(â35 °C)) and presented a melting peak that was split into three or four different peaks while their crystallites started to melt earlier (at ~30 °C). In addition, these PEBs were more sensitive to thermal degradation (two additional stages of degradation were observed) and, what is more important, were found to be prone to brittle fracture. As the Mw rose, the PEB samples became more ductile and those PEBs with a molecular weight above 90 Kg molâ1 possessed deformation at break values higher than 800%, secant modulus in the 296-324 range and ultimate tensile strength of >20 MPa.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the Mechanical Behavior of Biomedical Materials - Volume 64, December 2016, Pages 209-219
Journal: Journal of the Mechanical Behavior of Biomedical Materials - Volume 64, December 2016, Pages 209-219
نویسندگان
Jorge Fernández, Hegoi Amestoy, Haritz Sardon, Miren Aguirre, Aitor Larrañaga Varga, Jose-Ramon Sarasua,