کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7214571 | 1469466 | 2018 | 25 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Electrically conductive PDMS-grafted CNTs-reinforced silicone elastomer
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Conductive liquid silicone rubber-based composites were prepared through incorporation of fumed silica (FSiO2) and polydimethylsiloxanes (PDMS) modified MWCNTs (P-MWCNTs), and their mechanical and electrical properties were investigated. It is shown that the introduction of P-MWCNTs with P-MWCNTs/FSiO2 ratio of 0.25/30 (w/w) increases the cross-linking density and the thermal stability of the composites significantly. The improved mechanical performance, e.g., 60 % increase for Young's modulus and 47 % increase for tear strength, should be ascribed to the stronger interfacial interaction between P-MWCNTs and PDMS matrix and better dispersion of P-MWCNTs due to existence of PDMS on CNTs surface. Moreover, the better dispersion of P-MWCNTs also ensures much higher electrical conductivity than original carboxyl functionalized MWCNTs (COOH-MWCNTs) at relatively low loading, e.g., 10â3â¯Sâ¯mâ1 versus 10â8â¯Sâ¯mâ1 at MWCNTs/FSiO2 ratio of 2.5/30, which could be attributed to the formation of CNTs network.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Science and Technology - Volume 159, 3 May 2018, Pages 208-215
Journal: Composites Science and Technology - Volume 159, 3 May 2018, Pages 208-215
نویسندگان
Junhua Kong, Yuejin Tong, Jiaotong Sun, Yuefan Wei, Warintorn Thitsartarn, Chee Chuan Yeo Jayven, Joseph Kinyanjui Muiruri, Siew Yee Wong, Chaobin He,