کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7215924 | 1469540 | 2013 | 6 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Importance of the morphology and structure of the primary aggregates for the dispersibility of carbon nanotubes in polymer melts
ترجمه فارسی عنوان
اهمیت مورفولوژی و ساختار سازه های اولیه برای پراکندگی نانولوله های کربن در ذرات پلیمر
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ترجمه چکیده
پراکندگی نانولوله های کربنی چندبخشی غیر توانی در یک ماتریس پلیمری با توجه به نقش مورفولوژی و ساختار سازه های اولیه بررسی شده است. ذرات، که با استفاده از روش یک مقیاس پذیر، توسط بخار سازی بخار شیمیایی کاتالیستی سیکل شده و با استفاده از روش یک مقیاس قابل اندازه گیری، در مخلوط کردن ذوب در پلی استایرن پراکنده می شوند. آستانه نفوذ پرکننده، که از طریق تجزیه و تحلیل های ریاضی و طیف سنجی دی الکتریک ارزیابی می شود، یک مرتبه کمتری نسبت به نانولوله های تجاری موجود با ویژگی های مشابه است. این به ساختار سلسله مراتبی ارگانیسم های اولیه وابسته است، که هر دو نفوذ پلیمر را در مراحل اولیه مخلوط کردن و کشیدن از نانولوله های مورد نیاز برای انطباق آنها تسهیل می کند. پراکندگی بالا برای به ثمر رساندن یکپارچگی نانولوله ها به دست نمی آید، و نانوکامپوزیت ها دارای ثبات حرارتی بالا و خواص مکانیکی پویا در مقادیر کم پرکننده است.
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
The dispersibility of unfunctionalized multi-walled carbon nanotubes in a polymer matrix is studied focusing on the role of the morphology and structure of the primary aggregates. The particles, synthesized by fluidized bed catalytic chemical vapor deposition and purified through a scalable one-pot method, are dispersed in polystyrene by melt mixing. The filler percolation threshold, assessed through rheological analyses and dielectric spectroscopy, is one order of magnitude lower than that of commercially available nanotubes with similar features. This is ascribed to the hierarchical structure of the primary aggregates, which facilitates both the infiltration of the polymer in the earlier stages of mixing and the pulling out of the nanotubes required for their individualization. The high dispersibility is not achieved to the detriment of the nanotube integrity, and the nanocomposites exhibit enhanced thermal stability and dynamic mechanical properties at low amounts of filler.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Science and Technology - Volume 85, 21 August 2013, Pages 17-22
Journal: Composites Science and Technology - Volume 85, 21 August 2013, Pages 17-22
نویسندگان
M. Salzano de Luna, L. Pellegrino, M. Daghetta, C.V. Mazzocchia, D. Acierno, G. Filippone,