کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7220676 | 1470330 | 2015 | 14 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of boron and carbon addition on microstructure and mechanical properties of metastable beta titanium alloys
ترجمه فارسی عنوان
اثر افزودن بور و کربن بر ریزساختار و خواص مکانیکی آلیاژهای متاستاز بتا تیتانیوم
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
آلیاژهای ²-تیتانیوم، بور و کربن، راه حل درمان، سالخورده، میکروسکوپ الکترونی، آزمایش کششی،
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی (عمومی)
چکیده انگلیسی
Effect of boron and carbon on microstructure and mechanical properties of β titanium alloys Ti-15V-3Cr-3Mo-3Sn, Ti-10V-2Fe-3Al, and Ti-5V-5Mo-5Al-3Cr has been studied in detail. The addition of boron and carbon results in refinement of β grain size and α-precipitates during ageing. While the hardness and tensile strength increase with the addition of boron and carbon, the elongation to failure deteriorates. The increase in strength is attributed to a synergistic effect of grain refinement and load sharing by TiB and TiC particles; whereas decrease in elongation is due to the brittleness of these hard particles. Ageing results in increase in strength and decrease in elongation as compared to solution treatment condition. In this case, the effect of boron and carbon is marginal. Further enhancement in the properties can be achieved by fine tuning heat treatment parameters. Multiple slopes are observed in log-log plots of true stress-true strain thereby implying different deformation mechanisms over a large range of plastic deformation.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials & Design - Volume 67, 15 February 2015, Pages 50-63
Journal: Materials & Design - Volume 67, 15 February 2015, Pages 50-63
نویسندگان
Ravinaik Banoth, Rajdeep Sarkar, Amit Bhattacharjee, T.K. Nandy, G.V.S. Nageswara Rao,