Effect of CdCl2 heat treatment in (Ar + O2) atmosphere on structural and optical properties of CdTe thin films

Cadmium telluride (CdTe) thin films were deposited by thermal evaporation method under base pressure 2 × 10−5 mbar on corning glass substrate. In this work, we study the effect of cadmium chloride (CdCl2) heat treatment in argon and oxygen (Ar + O2) atmosphere on the structural, morphological and optical properties of CdTe thin films to achieve high quality thin film absorber layer for solar cells applications. The structural characteristics were studied by X-ray diffraction (XRD). The microstructure parameters of the films such as average grain size (Davg), average lattice strain (εavg) and dislocation density (ρD) have been calculated via XRD line broadening analysis. XRD investigation revealed that, the samples show polycrystalline nature pronounced with cubic zinc blende structure with a strong preferentially (1 1 1) texture orientation. It has been found that the crystallinity of the films enhanced during (Ar + O2) annealing and CdCl2 heat treatment. The surface morphology of CdTe thin films was investigated by field emission scanning electron microscope (FE-SEM). XRD and FE-SEM results of CdCl2 treated films showed recrystallization and progressive increase in grain size. The optical properties of all samples were estimated using UV-vis-near-infrared (NIR) spectrophotometer. The Swanepoel envelope method has been employed to evaluate the various optical parameters of CdTe films such as refractive index and film thickness. The as-deposited films have a relatively high value of refractive index of 2.54, in contrast the CdCl2 treated films have a relatively low value of 2.1 in the whole wavelength range. The optical energy gap values slightly decrease from 1.56 eV for as-deposited films up to 1.54 eV for CdCl2 heat treated films. CdCl2 heat treatment in (Ar + O2) atmosphere is found to be a promising method to improve the physical properties of CdTe thin film solar cells.