کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7225257 1470572 2018 18 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Simulation of the effect of spot size on temperature field and weld forming in laser tissue welding
ترجمه فارسی عنوان
شبیه سازی اثر اندازه نقطه در زمینه دما و جوش شکل گیری در جوشکاری بافت لیزر
کلمات کلیدی
جوش بافت لیزر بافتی، زمینه دما، شکل گیری جوش، اندازه نقطه،
ترجمه چکیده
جوش بافت لیزر زیستی یک پتانسیل عالی برای تکنولوژی جایگزینی بافت بافت است. با این حال، بسیاری از تحقیقات لیزر جوشکاری بافت بیولوژیکی بر روی بافتشناسی مزمن پس از تابش لیزر، عدم تجزیه و تحلیل سیستماتیک پارامترهای لیزر و سایر عوامل مرتبط با تاثیر آنستوموز بافت بافت بافت تمرکز کردند. در این کار، به منظور درک انتقال حرارت و توزیع حرارت، یک مدل ساختار دو لایه پوست، با نتایج آزمایشگاهی که بر مبنای تئوری انتقال بیولوژیکی حرارت داده شده بود، مورد تایید و تایید قرار گرفت. تحت شرایط اندازه های مختلف نقطه پاسخ دما از مدل، از جمله دمای پیک، توزیع میدان دما و رفتار زمان، بر اساس منبع حرارت تابش گاوسی محاسبه شد. ما تاثیر تغییرات در اندازه لیزر نقطه در ناحیه دگرایش حرارتی تولید شده در جوشکاری لیزر پوست را ارزیابی کردیم. نتایج محاسبه اساسا در توافق خوب با نتایج تجربی نشان داد که مدل توسعه یافته اعتبار و معقول است.
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی (عمومی)
چکیده انگلیسی
Laser Biological Tissue Welding is a great potential for tissue suture replacement technology. However, most of the biological tissue laser welding research focused on the chronic histology after laser irradiation, the lack of systematic analysis of laser parameters and other related factors on the impact of tissue welding anastomosis effect. In this work, in order to understand the heat transfer and heat distribution, a two-layer structure model of skin was developed and validated with the experimental results, which is based on the theory of bio-heat transfer. Under the condition of different spot sizes, the temperature response of the model, including the peak temperature, the temperature field distribution and the time behavior, were calculated according to the Gaussian distribution laser heat source. We evaluated the effect of changes in laser spot size on the thermal denaturation zone produced during laser skin welding. The calculated result basically in good agreement with the experimental result indicated that the developed model was validity and reasonable.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Optik - Volume 155, February 2018, Pages 315-323
نویسندگان
, , ,