Significantly improved charge stability of cellular polypropylene films by fluorination and subsequent annealing

An extremely effective and practical approach is proposed and used for improving charge stability of cellular polypropylene (PP) films. The approach is composed of fluorination and subsequent annealing of the PP films. Surface charge stability is significantly improved by the approach, as revealed by the measurements of open-circuit thermally stimulated discharge (TSD) current, charge TSD and isothermal charge decay at 90 °C. As an example, after 7 h at 90 °C, the amount of surface charge of the treated PP film by the approach still remains about 72% of its initial value, while the corresponding value is only 27% for the virgin PP film. The improvement of charge stability is attributed to chemical composition change and structure modification of the PP films due to the fluorination and annealing treatments, as indicated by attenuated total reflection infrared analyses and wide angle X-ray diffraction measurements. The treatments eliminate the shallow charge traps almost completely and produce much deeper ones.