کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
729670 1461496 2016 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
On-site calibration system for trace humidity sensors
ترجمه فارسی عنوان
سیستم کالیبراسیون در محل برای سنسور رطوبت ردیابی
کلمات کلیدی
رطوبت ردیابی، اندازه گیری، کالیبراسیون سنسور، نفوذ بخار آب، لوله های پلیمری
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی کنترل و سیستم های مهندسی
چکیده انگلیسی

A portable device for calibration of trace humidity sensors and an adopted calibration procedure have been developed. The calibration device is based on humidity generation by permeating water through polymeric membrane tubes. Water vapour transmission rates for various polymers were experimentally determined in order to select the most suitable polymeric material. The developed trace humidity generator consists of a gas-flow polymeric hose immersed in a water reservoir thermostated by a sensor-controlled heater. Mole fractions of water vapour between 1 μmol mol−1 and 350 μmol mol−1 (equivalent to frost-point temperatures from −76 °C to −31 °C) were generated by varying either the operating temperature or gas flow. The operating temperature can be varied from 20 °C to 60 °C and kept stable within 0.1 K. Uncertainty analysis indicated that the trace humidity generator produces gas flows of constant humidity amounts with a relative expanded uncertainty less than 3.4% (k = 2) of the generated value.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Measurement - Volume 91, September 2016, Pages 251–257
نویسندگان
, , , ,