کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
730469 | 892974 | 2011 | 5 صفحه PDF | دانلود رایگان |
Porous materials such as aluminum foam have been investigated for possible use as impact shock absorbers in transportation aeronautic applications. However, the response of aluminum foam during impacts at high velocities of more than 100 m/s is not yet fully understood. A high-velocity impact experiment was therefore carried out to clarify impact shock absorption properties of aluminum foam. A one-stage powder gun was used to accelerate an aluminum foam sample to impact a rigid wall. Velocity and deformation of the aluminum foam sample during impact was studied using a digital high-speed video camera, while the pressure wave in the aluminum foam sample was measured using a PVDF gauge. The experimental observations revealed uneven collapse of the aluminum foam sample structure during high speed impact with a general stress plateau effect, typical for cellular material structures when subjected to quasi-static loading.
► A high speed impact experiment using low-density aluminum foam was conducted.
► Velocity during impact was constant.
► A general stress plateau effect was observed.
► This is typical of cellular materials under quasi-static loading.
► Kinetic energy absorption is negligible using this material in high speed impact.
Journal: Measurement - Volume 44, Issue 10, December 2011, Pages 2185–2189