کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
731443 893065 2012 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Accurate measurements of output characteristics and detonations of motorbike high-speed racing engine and their optimization at actual atmospheric conditions and combusted mixture composition
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی کنترل و سیستم های مهندسی
پیش نمایش صفحه اول مقاله
Accurate measurements of output characteristics and detonations of motorbike high-speed racing engine and their optimization at actual atmospheric conditions and combusted mixture composition
چکیده انگلیسی

At a motorbike high speed racing engine there is very important an output engine characteristics which depends significantly on a detonation combustion rate, atmospheric conditions and a combusted mixture composition. The combustion process has got a relevant influence on a wear degree of main engine parts or on their damage eventually. The detonation combustion rate is very important because this kind of burning can be not only destructive but a useful phenomenon, as well. If the process of detonation burning is kept on a certain level, it can help significantly to the next increasing of an engine power output. In this article there is described the measurements of output characteristics of a high-speed racing engine which were performed by means of a data-recording system and the detonation combustion was evaluated using a quantitative method. The actual values of atmospheric conditions and the mixture composition were added to the measured values. Then the obtained values are compared visually with a damage degree of an engine piston caused by the detonation burning. The result is a limit value expressed in a number of detonation units related to a run distance interval of the vehicle driven by the high-speed racing engine. In framework of this run distance interval there is the process of detonation burning profitable. As well as it increases an engine power output and together it is not destructive with regard to engine design parts.


► We measured output characteristics of a high-speed racing engine which were performed by means of a data-recording system.
► Detonation combustion was evaluated using a quantitative method.
► The actual values of atmospheric conditions and the mixture composition were added to the measured values.
► Then the obtained values are compared visually with a damage degree of an engine piston caused by the detonation burning.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Measurement - Volume 45, Issue 5, June 2012, Pages 1067–1076
نویسندگان
, , ,