A novel optical diagnostic technique for analyzing the recrystallization characteristics of polycrystalline silicon thin films following frontside and backside excimer laser irradiation

Excimer laser annealing (ELA) is a widely used technique for producing polycrystalline silicon (poly-Si) thin films. An optical inspection system with simple optical arrangements for rapid measurement of recrystallization results of poly-Si thin films is developed in this study. The recrystallization results after both frontside ELA and backside ELA can be easily visible from the profile of peak power density distribution using the optical inspection system developed with an optimized moving velocity of 0.312 mm/s of the specimen. The method of backside ELA is suggested for batch production of low-temperature polycrystalline silicon thin-film transistors due to higher laser beam utilization efficiency and lower surface roughness of poly-Si films.

► Optical diagnostic system with simple optical arrangements has been developed in this work.
► Recrystallization results for frontside ELA and backside ELA are the same.
► Backside ELA is of high potential to be recommended for batch production of LTPS TFTs.