Laser controlled melting of pre-prepared inconel 718 alloy surface

Laser treatment of Inconel 718 alloy surface is carried out. The alloy surface is coated with a carbon layer containing 7% TiC particles prior to the laser treatment. The carbon coating provides increased absorption of the incident laser beam and holds TiC particles. The microstrutural and morphological changes in the laser treated region are examined using optical and scanning electron microscopes, energy dispersive spectroscopy, and X-ray diffraction. The microhardness of the surface is measured and the residual stress formed at the surface vicinity is determined from the XRD technique. It is found that partial dissolution of carbide particles takes place at the surface. The composition of fine grains at the surface vicinity, nitride compounds formed, and dissolution of Laves phase at the surface region enhances the hardness at the treated surface. In addition, laser treated surface is free from the micro-crack network and cavities.

► Partially dissolution of carbide particles takes place at the surface.
► Composition of fine grains at the surface vicinity, nitride compounds formed.
► Dissolution of Laves phase at the surface region enhances the hardness at the treated surface.
► Laser treated surface is free from the micro-crack network and cavities.