کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7445996 1483945 2018 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
New test methods to verify the performance of chemical injections to deal with rising damp
ترجمه فارسی عنوان
روش های جدید آزمایش برای بررسی عملکرد تزریق های شیمیایی برای مقابله با افزایش رطوبت
کلمات کلیدی
افزایش رطوبت، دوره ضد باکتری، محصولات تزریقی، روش آزمون،
ترجمه چکیده
تزریق محصولات شیمیایی، به معنای نفوذ در مویرگ ها از مواد تشکیل یک دیواره تحت تاثیر قرار داده، شاید روش پراکنده ترین برای مقابله با افزایش نمک است. اکثر این محصولات شیمیایی درمان های هیدروفوب است آنها می توانند یا مبتنی بر حلال یا (به طور فزاینده ای) آب هستند. به طور سنتی، این محصولات مایع هستند. با این حال، در سالهای اخیر، تمایل به استفاده از محصولات کرم مانند دیده می شود. از عمل، با توجه به اثربخشی تزریق ها، عقاید کاملا متضادی حاصل می شود و اغلب اختلافات میان مالک ساختمان و اجرای قراردادی بر عملکرد درمان ایجاد می شود. گاهی اوقات خشک شدن آهسته از دیوارهای مرطوب برای پوشش یک درمان نامناسب استفاده می شود؛ در موارد دیگر معلوم نیست که آیا تزریق یا یک گچ بازسازی شده به طور همزمان اعمال می شود یا خیر. تحقیق به منظور ایجاد یک روش برای ارزیابی اثربخشی روش های تزریق در یک روش ساده و سریع انجام شد، هم برای ارزیابی عملکرد در عمل و هم برای استفاده در آزمایشگاه. تاثیر جانبی جالب برنامه تحقیقاتی این بود که چندین پارامتر اساسی که بر اثربخشی محصولات شیمیایی موثرند، آشکار شد. در این مقاله، تمرکز بر روی روش ارزیابی سریع برای تمرین خواهد بود.
موضوعات مرتبط
مهندسی و علوم پایه شیمی شیمی تئوریک و عملی
چکیده انگلیسی
The injection of chemical products, meant to penetrate in the capillaries of the materials composing an affected wall, is perhaps the most diffused method to deal with rising damp. The majority of these chemical products are hydrophobic treatments; they can be either solvent-based or (increasingly) water-based. Traditionally, these products are liquid. In the last years however, a tendency towards the use of cream-like products can be observed. From practice, quite contradictory opinions arrive with respect to the effectiveness of injections and quite often disputes develop between building owner and executing contractor on the performance of the treatment. Sometimes the slow drying of humid walls is used to cover a failing treatment; in other cases, it is not clear whether the injection or a simultaneously applied restoration plaster is responsible for a visual improvement. Research was performed in order to establish a method to evaluate the effectiveness of injection methods in a simple and quick way, both for assessing performance in practice and for use in laboratory. Interesting side effect of the research program was that also several essential parameters, influencing the effectiveness of chemical products, became evident. In this article, focus will be on the quick assessment method for practice.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Cultural Heritage - Volume 31, Supplement, June 2018, Pages S52-S59
نویسندگان
, , ,