کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
745773 | 894430 | 2011 | 6 صفحه PDF | دانلود رایگان |

This paper reports the feasibility study of glucose oxidase (GOx) immobilized cellulose–tin oxide (SnO2) hybrid nanocomposite as a glucose biosensor. Porous SnO2 layer was grown on regenerated cellulose films via liquid phase deposition technique with varying deposition time. Tin oxide was crystallized in the solution and formed nanocrystal coatings on the cellulose films. Enzyme (GOx) was immobilized into cellulose–SnO2 hybrid nanocomposite by physical absorption method. X-ray photoelectron spectroscopy analysis revealed the successful immobilization of GOx into the cellulose–SnO2 hybrid nanocomposite via covalent bonding between GOx and SnO2. The glucose biosensor under study is displayed linear response in the range of 0.5–12 mM with correlation coefficient of 0.96, which can cover the clinical region of glucose concentration. These results indicate that the cellulose–SnO2 hybrid nanocomposite can be an inexpensive, flexible and disposable glucose biosensor.
Journal: Sensors and Actuators B: Chemical - Volume 157, Issue 1, 20 September 2011, Pages 177–182