کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
760919 1462892 2013 10 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Design, fabrication and performance tests for a polymer-based flexible flat heat pipe
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی (عمومی)
پیش نمایش صفحه اول مقاله
Design, fabrication and performance tests for a polymer-based flexible flat heat pipe
چکیده انگلیسی

In this paper, we report on the novel design, fabrication and performance tests for a polymer-based flexible flat heat pipe (FHP) with a bending angle in the range of 15–90°. Each heat pipe is 4 mm thick, 20 mm wide and 80 mm long, with two layers of No. 250 copper mesh as the wicking material. A copper/silicone rubber hybrid structure is designed and fabricated to achieve the flexibility of the heat pipe. Thermal characteristics are measured and studied for de-ionized water under different working conditions. Experimental results reveal that a bending angle of 15° on the vertical plane has a better thermal performance than those of heat pipes with/without bending. In addition, a higher power of 12.67 W can be transferred/delivered.


► Fabrication of a polymer-based flexible flat heat pipe.
► Bending angle of 15° will lead to a better thermal performance of the system.
► Powers higher than 12.67 W can be transferred/delivered.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Energy Conversion and Management - Volume 70, June 2013, Pages 10–19
نویسندگان
, ,