Dynamic knock detection and quantification in a spark ignition engine by means of a pressure based method

In spark ignition engines, knock onset limits the maximum spark advance. An inaccurate identification of this limit penalises the fuel conversion efficiency. Thus it is very important to define a knock detection method able to assess the knock intensity of an engine operating point.Usually, in engine development, knock event is evaluated by analysing the in-cylinder pressure trace. Data are filtered and processed in order to obtain some indices correlated to the knock intensity, then the calculated value is compared to a predetermined threshold. The calibration of this threshold is complex and difficult; statistical approach should be used, but often empirical values are considered.In this paper a method that dynamically calculates the knock threshold necessary to determine the knock event is proposed. The purpose is to resolve cycle by cycle the knock intensity related to an individual engine cycle without setting a predetermined threshold.The method has been applied to an extensive set of experimental data relative to a gasoline spark-ignition engine.Results are correlated to those obtained considering a traditional method, where a statistical approach has been used to detect knock.

► Experimental data have been analyzed by a pressure based method.
► Knock intensity level depends on a threshold varying with the engine operating point.
► A dynamic method is proposed to overcome the definition of a predetermined threshold.
► The knock intensity of each operating point is quantified by a dimensionless index.
► The knock limited spark advance can be detected by means of this index.