کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
765908 | 1462511 | 2014 | 9 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Grinding behavior and surface appearance of (TiCp + TiBw)/Ti-6Al-4V titanium matrix composites Grinding behavior and surface appearance of (TiCp + TiBw)/Ti-6Al-4V titanium matrix composites](/preview/png/765908.png)
(TiCp + TiBw)/Ti-6Al-4V titanium matrix composites (PTMCs) have broad application prospects in the aviation and nuclear field. However, it is a typical difficult-to-cut material due to high hardness of the reinforcements, high strength and low thermal conductivity of Ti-6Al-4V alloy matrix. Grinding experiments with vitrified CBN wheels were conducted to analyze comparatively the grinding performance of PTMCs and Ti-6Al-4V alloy. Grinding force and force ratios, specific grinding energy, grinding temperature, surface roughness, ground surface appearance were discussed. The results show that the normal grinding force and the force ratios of PTMCs are much larger than that of Ti-6Al-4V alloy. Low depth of cut and high workpiece speed are generally beneficial to achieve the precision ground surface for PTMCs. The hard reinforcements of PTMCs are mainly removed in the ductile mode during grinding. However, the removal phenomenon of the reinforcements due to brittle fracture still exists, which contributes to the lower specific grinding energy and grinding temperature of PTMCs than Ti-6Al-4V alloy.
Journal: Chinese Journal of Aeronautics - Volume 27, Issue 5, October 2014, Pages 1334–1342