Boundary effect on the softening curve of concrete

The apparent fracture energy of concrete experimentally determined on the basis of the work of fracture in bending or wedge splitting tests becomes larger with increasing specimen dimensions. This experimental observation may be attributed to the varying local fracture energy along the crack path. When the crack tip approaches the specimen boundary, the size of the fracture process zone will be reduced and, consequently, only a portion of the fracture energy is activated; i.e., the local fracture energy is getting smaller. The influence of this boundary effect diminishes with increasing specimen size resulting in the size dependence of the apparent fracture energy determined by the work-of-fracture method as an average value in the ligament. With varying local fracture energy, the local softening curve will also show variations. The latter are subject of the present study. Wedge splitting tests with different specimen sizes as well as inverse analyses of these experiments were carried out. For the inverse analyses, the cohesive crack model was adopted and an evolutionary optimization algorithm has been used. The boundary effect on the local fracture properties was taken into account and, as a result, the variation of the softening curve along the crack path could be determined. It was found that the tail of the softening curve is shortened and lowered due to the boundary effect whereas the initial slope of this curve appears to be not affected.