Impact strength of joints bonded with high-strength pressure-sensitive adhesive

The impact strength of joints bonded with a double-coated high-strength pressure-sensitive adhesive (PSA) was experimentally investigated. PSA has recently been used to join parts of mobile devices such as smart-phones, which are often subjected to drop impacts. Consequently, the impact strength of PSA bonded joints has become important.Two types of specimens, butt joint specimens and double cantilever beam (DCB) specimens bonded with adhesives were utilized for the experiments. Quasi-static tests and impact tests of the specimens were carried out using a mechanical testing machine and an impact testing machine. The PSA layers in the specimens were observed using a high-speed digital camera. The deformation and strain distribution in the adherends of the DCB specimens were also measured using a novel high-speed digital camera with photoelastic imaging capability.Though the strength of the butt joints increased as the loading rate increased, the critical fracture energy of the DCB specimens decreased at high loading rates. This may be attributed to the transition to the brittle nature of the PSA in the loading range in which no cavitation occurred. To verify the critical fracture energy obtained with the DCB tests, finite element analyses (FEA) based on the cohesive zone model (CZM) were carried out, and the load–displacement curves of the DCB tests were simulated. The predicted results showed good agreements with the experimental results.