Process optimization of solvent based polybenzimidazole adhesive for aerospace applications

The use of adhesive bonding for high temperature applications is becoming more challenging because of low thermal and mechanical properties of commercially available adhesives. However, the development of high performance polymers can overcome the problem of using adhesive bonding at high temperature. Polybenzimidazole (PBI) is one such recently emerged high performance polymer with excellent thermal and mechanical properties. It has a tensile strength of 160 MPa and a glass transition of 425 °C. Currently, PBI is available in solution form with only 26% concentration in Dimethyl-acetamide solvent. Due to high solvent contents, the process optimization required lot of efforts to form PBI adhesive bonded joints with considerable lap shear strength. Therefore, in present work, efforts are devoted to optimize the adhesive bonding process of PBI in order to make its application possible as an adhesive for high temperature applications. Bonding process was optimized using different curing time and temperatures. Epoxy based carbon fiber composite bonded joints were successfully formed with single lap shear strength of 21 Mpa. PBI adhesive bonded joints were also formed after performing the atmospheric pressure plasma treatment of composite substrate. Plasma treatment has further improved the lap shear strength of bonded joints from 21 MPa to 30 MPa. Atmospheric pressure plasma treatment has also changed the mode of failure of composite bonded joints.