A semi-empirical approach for residual stresses in electric discharge machining (EDM)

High residual stresses are developed on the surfaces of electric discharge machined parts. In this study, layer removal method is used to measure the residual stress profile as a function of depth beneath the surface caused by die sinking type EDM. Cracking and its consequences on residual stresses are also studied on samples machined at long pulse durations. A modified empirical equation is developed for scaling residual stresses in machined surfaces with respect to operating conditions. In this model, a unit amplitude shape function representing change in curvature with respect to removal depth is proposed. The proposed form is found to be a special form of a Gauss Distribution. It is the sum of two Gaussian peaks, with the same amplitude and pulse width but opposite center location. The form can be represented by three constant coefficients. These coefficients depend on the released energy by a power function.