کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
781976 | 1464564 | 2009 | 7 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: An instrument for measuring abrasive water jet diameter An instrument for measuring abrasive water jet diameter](/preview/png/781976.png)
In order to improve the accuracy of abrasive water jet (AWJ) machining the precise value of the jet diameter has to be known. Because of an aggressive environment caused by high velocity abrasive grains, the diameter is not easily measured. That is why a measuring device consisting of a load cell and a wear resistant probe was developed. The device measures the force of the jet while it passes over the edge of the probe. If the feed rate of the jet is constant and the time needed for jet to pass is known, the diameter can be determined. Because of probe wear issue several preliminary tests were made with water jet only in order to determine the measuring uncertainty and accuracy of the device. In the end the measurement of the AWJ was performed for two different focusing nozzles of different diameters.
Journal: International Journal of Machine Tools and Manufacture - Volume 49, Issue 11, September 2009, Pages 843–849