کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
788015 | 1465365 | 2011 | 12 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Modeling of the mechanical behavior of amorphous glassy polymer based on the quasi-point defect theory—Part II: 3D formulation and finite element modeling of polycarbonate Modeling of the mechanical behavior of amorphous glassy polymer based on the quasi-point defect theory—Part II: 3D formulation and finite element modeling of polycarbonate](/preview/png/788015.png)
A three-dimensional formulation of the quasi-point defect theory has been developed and the corresponding constitutive equations have been implemented in the finite element package Abaqus, via the writing of an UMAT file. The proposed tool has been completed to support the large strain description and thus can perform a general structure calculation. Referring to a unique set of parameters identified in the part I of this paper for glassy amorphous bisphenol-A polycarbonate (PC-BPA), various commonly used tests were then considered as structural patterns and modeled. The whole mechanical response as well as localization phenomena measured via video technique is well predicted by the calculations. These results also highlight the need to consider the spatial dimension in a sense that the mechanical behavior up to large strain is related to structural modifications, especially for materials such as amorphous polymers that exhibit yield, softening and hardening intrinsic phenomena.
Journal: International Journal of Non-Linear Mechanics - Volume 46, Issue 3, April 2011, Pages 507–518