کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7889304 | 1509859 | 2018 | 9 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
High wear-resistant performance of thermosetting polyimide reinforced by graphitic carbon nitride (g-C3N4) under high temperature
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The two-dimensional (2D) material of graphitic carbon nitride (g-C3N4) has shown great promise for tribo-materials due to special molecular structure. In this work, we report an effective approach to enhance anti-wear of thermosetting polyimide (TPI) by filling with g-C3N4 under high temperature. TPI composite (TPT-1) and g-C3N4 were firstly prepared. Then, friction and wear behavior of TPT-1 was studied and comparatively evaluated with neat resin from room temperature to 350â¯Â°C. As a result, the wear resistance of TPI was able to significantly improve and an much lower wear rate (7.29â¯Ãâ¯10â7â¯mm3/Nâ¯m) was achieved at 350â¯Â°C. Moreover, mechanism of friction and wear was demonstrated that transfer film formed by introducing g-C3N4 with high E-modulus and hardness could effectively share the load with TPI and prevent from further abrasion of resin in contact surfaces. This work could help researchers to design a new TPI tribo-material used at high temperature.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part A: Applied Science and Manufacturing - Volume 113, October 2018, Pages 200-208
Journal: Composites Part A: Applied Science and Manufacturing - Volume 113, October 2018, Pages 200-208
نویسندگان
Chunjian Duan, Dongming Yuan, Zenghui Yang, Song Li, Liming Tao, Qihua Wang, Tingmei Wang,