کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7890124 1509881 2016 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
An experimental analysis of the fracture behavior of composite bonded joints in terms of cohesive laws
ترجمه فارسی عنوان
یک تجزیه و تحلیل تجربی از رفتار شکست خوردگی اتصالات کامپوزیتی از نظر قوانین یکپارچه
ترجمه چکیده
مدل سازی اتصالات چسبندگی با استفاده از مدلهای انسانی متکی بر تعریف قوانین یکپارچه است. اگرچه قوانین انسانی وابسته به حالت بارگیری هستند، اما شواهد تجربی برای توصیف این وابستگی وجود ندارد. در عین حال، ضخامت چسبنده و چسبنده بر روی چقرمگی شکستگی پیوند تأثیر می گذارد، اما تأثیر آن بر قانون همبستگی روشن نشده است. در این کار، یک ویژگی تجربی از چسب اپوکسی ارائه شده است. اثر متقابل حالت بر سختی باند و قانون انعطاف پذیر آن در مقایسه با اثر چسبندگی و ضخامت پایه مقایسه شده است. تاثیر این دو آخرین پارامتر در مقایسه با تأثیر مخلوط حالت، که عمدتا شکل قانون منسجم را مشخص می کند، جزئی است. در نهایت، نتایج این یافته های تجربی در مورد شبیه سازی عددی اتصالات چسب مورد بحث قرار گرفته است.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد سرامیک و کامپوزیت
چکیده انگلیسی
Modeling adhesive joints by means of cohesive models relies on the definition of cohesive laws. Although cohesive laws are known to be dependent on the loading mode, there is a lack of experimental evidences to describe this dependence. At the same time, the adherend and adhesive thicknesses are known to affect the fracture toughness of the bond, but their effect on the cohesive law has not been clarified. In this work, an experimental characterization of an epoxy adhesive is presented. The effect that the mode mixity has on the bond toughness and its cohesive law is compared against the effect of the adhesive and adherend thicknesses. The impact of these two latest parameters is shown to be minor if compared to the influence of the mode mixity, which mainly defines the cohesive law shape. Finally, the implications of these experimental findings on the numerical simulation of adhesive joints are discussed.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part A: Applied Science and Manufacturing - Volume 90, November 2016, Pages 234-242
نویسندگان
, , , ,