کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
789071 1465606 2015 21 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Opening-mode fractures of a brittle coating bonded to an elasto-plastic substrate
ترجمه فارسی عنوان
شکاف های باز شدن یک پوشش شکننده که به یک بستر الاستوپلاستیک بستگی دارد
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی


• A closed form approximate solution is obtained for an elastic coating on ductile substrate.
• Three stress states are considered covering elastic, elastoplastic and fracture behavior.
• Energy release rate is calculated for an opening-mode fracture in the coating.
• Comparison of the solution with the FEM demonstrates the accuracy of the elastic solution.
• Experimental results validate the model for the opening-mode fracture pattern evolution.

An elasto-plastic fracture model is presented to study the opening-mode fractures for an alumina coating fully bonded to an aluminum substrate undergoing large tensile deformation. The periodic stress field in the coating layer is described by one section between two adjacent cracks. The coating material is brittle and elastic; whereas the substrate exhibits elasto-plastic behavior that is characterized with a bi-linear hardening plastic function. For simplicity, a one-dimensional elasto-plastic model is employed to the substrate; an elasto-plastic shear lag model is used to describe the stress transfer from the substrate to the coating; and a plane strain formulation is derived for stress analysis in the coating. Explicit solutions have been derived for the coating-substrate system under different loading stages. When the applied load is in the linear elastic state, the elastic field in the coating is verified with the finite element results. When the substrate yields, the fracture energy release rate can be calculated and the corresponding elasto-plastic fracture analysis is conducted. Experimental characterization has been further conducted to validate the present model, which in overall predicts the fracture initiation, infilling and saturation in the coating successfully. The present formulation is general and can be applicable to other types of coating – ductile substrate systems.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: International Journal of Plasticity - Volume 67, April 2015, Pages 171–191
نویسندگان
, , , ,