Effect of phenoxy-based coating resin for reinforcing pitch carbon fibers on the interlaminar shear strength of PA6 composites

Carbon fiber-reinforced thermoplastic composites have not been considered as constituent materials for structural parts due to the poor interfacial adhesion between the fiber and the thermoplastic matrix. In this work, polyamide 6 (PA6) composites with pitch carbon fibers (pCF) were fabricated by alternatively stacking PA6 films and pCF fabrics followed by being pressed. In order to improve the interfacial adhesion, phenoxy resin-based materials were coated on the surface of the fiber. The surface analyses of the fiber were carried out by XPS, TGA and dynamic contact angle method. Interlaminar shear strength (ILSS) of the composites was measured to evaluate the effect of the coating materials. The results showed that the composites with the coated pCF had higher ILSS than that with neat pCF by more than 20%. This indicated that a proper coating material can improve mechanical properties of the PA6 composites, which can be applied to the structural parts.