کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
789130 | 1465632 | 2013 | 24 صفحه PDF | دانلود رایگان |
The effects of strain rate and temperature on the yield and flow stress of AA5754 sheets are presented under uniaxial (tension and compression), dynamic (tension), and simple shear loading conditions. The present study investigates the anisotropic behavior of AA5754 sheets through experiments performed in the rolling (RD), 45° to rolling (DD), and transverse to rolling (TD) directions at room and elevated temperatures. The experimental results show that the strain rate sensitivity varied from negative at room temperature to positive at elevated temperatures (>150 °C), and the anisotropy was inversely proportional to the strain rate. Texture analysis was conducted on the specimens after uniaxial tension and simple shear deformation, using the neutron diffraction and electron back-scattered diffraction (EBSD) techniques. Rotation rate maps and orientation stability parameters, determined by the rate-sensitive model, were used to explain the kinematic stability of the initial texture components in AA5754 sheets during uniaxial tension and simple shear deformation. A visco-plastic self-consistent (VPSC) polycrystal model was used to simulate the evolution of the initial texture components in AA5754 sheets during uniaxial tension and simple shear deformation.
► A comprehensive study on AA5754 sheet alloys and the temperature dependence of SRS under various loading conditions.
► First study to document the evolution of texture and kinematic stability of initial texture components.
► Results provided the temperature dependence of SRS under various loading conditions.
► A slight change in texture is observed during uniaxial tension and simple shear deformation.
Journal: International Journal of Plasticity - Volume 41, February 2013, Pages 165–188