کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7891539 | 1509895 | 2015 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Formability optimisation of fabric preforms by controlling material draw-in through in-plane constraints
ترجمه فارسی عنوان
بهینه سازی شکل پذیری پریفرم های پارچه با کنترل کشیدن مواد از طریق محدودیت های درون هواپیما
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
A genetic algorithm is coupled with a finite element model to optimise the arrangement of constraints for a composite press-forming study. A series of springs are used to locally apply in-plane tension through clamps to the fibre preform to control material draw-in. The optimisation procedure seeks to minimise local in-plane shear angles by determining the optimum location and size of constraining clamps, and the stiffness of connected springs. Results are presented for a double-dome geometry, which are validated against data from the literature. Controlling material draw-in using in-plane constraints around the blank perimeter is an effective way of homogenising the global shear angle distribution and minimising the maximum value. The peak shear angle in the double-dome example was successfully reduced from 48.2° to 37.2° following a two-stage optimisation process.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part A: Applied Science and Manufacturing - Volume 76, September 2015, Pages 10-19
Journal: Composites Part A: Applied Science and Manufacturing - Volume 76, September 2015, Pages 10-19
نویسندگان
S. Chen, L.T. Harper, A. Endruweit, N.A. Warrior,