کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7891548 | 1509895 | 2015 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Tensile and creep performance of a novel mullite fiber at high temperatures
ترجمه فارسی عنوان
عملکرد کششی و خزش یک فیبر جدید مولییت در دماهای بالا
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
The novel fiber CeraFib75 with a composition near to pure mullite was analyzed with respect to its potential for high-temperature applications. This mullite fiber free of glass phase was aimed to overcome the strength of commercial oxide fibers at high-temperatures. Tensile tests at room and high temperatures ranging from 900 to 1400 °C and creep tests were performed. Nextelâ¢720, another crystalline mullite-alumina fiber, was tested as a reference. Microstructure and crystal phase analysis of the new fiber revealed mullite grains with traces of γ- and α-alumina in-between; it contains occasionally defects causing a reduced strength at room-temperature. Remarkably, at temperatures beyond 1200 °C, CeraFib75 presented a higher tensile strength than Nextelâ¢720. During tensile tests at 1400 °C, an extended region of inelastic deformation was observed for CeraFib fibers only, which was related to a grain boundary sliding mechanism. Creep rates were of the same order of magnitude for both fibers.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part A: Applied Science and Manufacturing - Volume 76, September 2015, Pages 37-43
Journal: Composites Part A: Applied Science and Manufacturing - Volume 76, September 2015, Pages 37-43
نویسندگان
Renato S.M. Almeida, Kamen Tushtev, Bernd ClauÃ, Georg Grathwohl, Kurosch Rezwan,